河北宏旭模具制造有限公司
主营产品: 护坡模具
现浇拱形骨架模板—现浇拱形骨架模板—现浇拱形骨架模板
价格
订货量(套)
¥475.00
≥100
店铺主推品 热销潜力款
㠗㠓㠔㠙㠙㠚㠖㠖㠓㠖㠖
在线客服
现浇拱形骨架模板 脱模方法 产品需放置阴凉处洒水3-8次
现浇拱形骨架模板的构成凝聚了不同模具之间的对接性,在拱形骨架护坡模板中,通常我们使用的主要为两点:现浇拱形骨架模板的预制生产以及拱形骨架护坡模具的现浇作业,两种模具主要结构特点以及造价都有非常大的区分。在拱形骨架护坡模板基本知识点中,主要是看设计图纸的需要,比如设计图纸要求使用镶边石预制块作业,那么需要采购的就是弧形板以及直板模具,这种是相对简单的拼接式拱形护坡。
现浇拱形骨架模板的规格一般都是1米或是2米的,尺寸规格比较大,必须选用钢模具生产,钢模具使用于马路的两旁,有标志性的位置,这种钢模具在使用过的过程中,不容易搬运,现浇拱形骨架模板因为自重也不回丢失,每年护坡的需求量都不算小,基本是选用钢模具生产,生产无需大型设备,投资小,模具可拆卸,可根据图纸要求定制尺寸,外面用角钢固定,结合处采用卡扣和螺栓组合成型,拆卸方便生产工艺简单,野外生产不受限制。The composition of cast-in-place arched skeleton formwork condenses the docking between different molds. In the arched skeleton slope protection formwork, we usually use two main points: the prefabrication production of cast-in-place arched skeleton formwork and the cast-in-place operation of arched skeleton slope protection mold. The main structural characteristics and cost of the two molds are very different. In the basic knowledge of arch skeleton slope protection template, it mainly depends on the needs of design drawings. For example, if the design drawings require the use of edging stone precast blocks, then the arc plate and straight plate mold need to be purchased, which is a relatively simple splicing arch slope protection.
The specifications of cast-in-place arched framework formwork are generally 1 m or 2 m, and the size is relatively large, so the steel mold must be used for production. The steel mold is used on both sides of the road, and it has a landmark position. This kind of steel mold is not easy to carry in the process of being used. The cast-in-place arched framework formwork is not lost because of its own weight, so the annual demand for slope protection is not small, Basically, the steel mould is used for production. The production does not need large-scale equipment, and the investment is small. The mould can be disassembled. The size can be customized according to the drawing requirements. The outside is fixed with angle steel, and the joint is formed by the combination of buckle and bolt. The disassembly is convenient, the production process is simple, and the field production is not limited.